INSTALLATION: Each knob comes with (1) 8-32 brass machine screw, at 1 1/4"Long. If you require longer screws or break-away screws, please make a note for us on the check-out page.

CARE INSTRUCTIONS:

UNLACQUERED BRASS is raw brass that is polished and left unlacquered allowing for natural aging over time. Often referred to as a “living finish”, unlacquered brass will take on a patina that will vary with exposure to sun, touch, oxygen and other airborne particles. It will age unevenly.

CARE: Pat dry after use to avoid hard water spots. A microfiber cloth can be used to remove fingerprints. Clean using liquid soap and water or a 50/50 solution of white vinegar and water. DO NOT soak the product in the solution. Dry after cleaning.

LACQUERED BRASS is protected from the natural aging process, it should not be polished.

CARE: Pat dry after use to avoid hard water spots. A microfiber cloth can be used to remove dust and fingerprints. Wash it in mild lukewarm suds, rinse it with lukewarm water, and wipe it dry. If the water is too hot it may remove the lacquer. Do NOT use vinegar, this may damage the lacquer.

UNLACQUERED COPPER is raw copper alloy that is left unlacquered allowing for natural aging over time. Often referred to as a “living finish”, unlacquered copper will take on a patina that will vary with exposure to sun, touch, oxygen and other airborne particles. It will age unevenly.

CARE: Pat dry after use to avoid hard water spots. A microfiber cloth can be used to remove fingerprints. Clean using liquid soap and water or a 50/50 solution of white vinegar and water. DO NOT soak the product in the solution. Dry after cleaning.

LACQUERED COPPER is protected from the natural aging process, it should not be polished.

CARE: Pat dry after use to avoid hard water spots. A microfiber cloth can be used to remove dust and fingerprints. Wash it in mild lukewarm suds, rinse it with lukewarm water, and wipe it dry. If the water is too hot it may remove the lacquer. Do NOT use vinegar, this may damage the lacquer.

NICKEL PLATED BRASS has a silver tone that tends to the warmer side of the color spectrum. It is a composition of nickel plating over brass.

CARE: Pat dry after use to avoid hard water spots. Clean using liquid soap and water.

Do NOT use vinegar, this may damage the protective coating.

MARBLE is a natural material and each piece will have its own unique color and pattern, finished with the the AUZ buttery hand-honed finish. It is a porous material and susceptible to staining.

CARE: Use a microfiber cloth to gently remove dust and fingerprints. Wash away any oil and food spills immediately with warm water and mild soap. Always use a soft cloth or non-abrasive sponge. Anything abrasive could damage the surface. Do NOT use any chemical cleaners.